Case Studies

A client located in Sri Lanka initially engaged a local in-situ service provider to conduct machining on 3 jetty cranes’ foundation baseplates; after several attempts, the service provider is still unable to fulfil the crane manufacturer’s required specification. With uncertainty insight for…

A client in Singapore was sourcing for a large scale CNC equipped machine shop to bore additional groove for a batch of 140 riser pipes connectors. Due to this is a last minute site specification change for an offshore project, this modification is needed to carry out in very short time…

An elevator’s motor shaft in a commercial building located at Singapore CBD area was found having excessive wear and chipped off damage at the bearing mounting area’s edge (shown in the photo below) during its periodic maintenance inspection. As the protocol from…

A client in the automotive industry has an existing engine holding jig and its key function is to rotate the engine for easier access of parts removal. The limitation is that the holding frame is at a fixed elevation and unable to perform a 180° rotation due to the engine overall height…

A feedstock process company located in Singapore, had encountered a badly worn off drive shaft on one of its key production ovens. The shaft is driven by a motor and supported by a bearing. The area where the bearing in contact with the shaft, is constantly subjected to…